Value Of Correct Timber Drying

An effectively dried hardwood is one with dampness content that is equivalent to that of the bordering environment. The correct lumber drying out technique will have a substantial result on the quality of your finished project.

Problems like bending and also honeycombing are protected against when the timber where your timber came from is properly dried out. This influences overall top quality as well as look of your project. Right wood drying out also lightens the weight of the timber, making it much easier to collaborate with.

The 2 strategies for drying out lumber air-drying and kiln-drying. The time it takes for the wood to dry makes it susceptible to fungi, mold and insect infestation.

In kiln-drying, a protected chamber with moisture as well as temperature level control is utilized to dry out the timber. This accelerate the drying procedure. Irregular heating has the potential to create different parts of the timber to agreement at various rates. This boosts the danger of the hardwood developing splits.

Lots of that usage kiln for drying out hardwood do so with the assistance of an infrared camera. The electronic camera offers a thermal image that helps ensure that the right amount of heat is being delivered to the lumber.

Powder Coating Your Bike Tank

Gasoline is tough on paint. Over time, the finish on your bike tank will become dull or faded from spills and gasoline vapor from when you are refueling. This can make your bike look old and worn. You can restore the look of your bike with powder coating.

Powder coating uses thermoplastic polymer to produce a hard and durable finish. The thermoplastic polymer comes in the form of powder which is electrostatically applied using a special powder coating gun. By electrostatically, this means that electricity is used to magnetize the work piece so that the polymer powders attach onto it. The work piece is then heated to a specific temperature which causes the polymer powder to melt and form a skin over the work piece.

Plenty of shops provide powder coating services. However, you can also do it yourself. Powder coating is not an overly complicated process.. Yes, you will need some equipment like a powder coating gun, infrared lamps, and an infrared camera. While these items may seem like a significant investment, there is the fact that you can use them for various projects in the future.

The infrared lamps and infrared camera are your alternative to industrial ovens that are used by some shops. The infrared lamps produce sufficient heat for almost all powder applications. The infrared camera is used for tuning the temperature and making sure that your gas tank is getting heated evenly.

Powder coating your bike tank should be quite easy. All you need is to prep the surface by removing all the original finish and cleaning the surface. Apply the polymer powder with the color of your choosing to the electrically-charged tank and then bake it according to specifications. That is all there is to it. And now you have a very nice-looking tank and bike.

Powder Coating Motorcycle Wheels

Changing the color of the wheels is an excellent way of changing and personalizing the look of your bike. Unlike a full-body paint job, you do not need any permit from the vehicle regulatory agency to make such modification to your bike. It is also quite simple to do. Some people use spray cans and, in most instances, the results are fine.  A popular method nowadays involves the use of air-drying rubber coating. The rubber coating is durable and provides great looking finish, available in matte and gloss. However, if you want professional-grade finish, your best option is with powder coating. You can take your wheels to a shop that performs powder coating or you can do it yourself. Powder coating is actually a very straightforward process, one that you can do on your yard or in your garage shop if you have enough space. It might seem an intimidating process at first, but once you have learned it, you’ll be very happy with how useful powder coating actually is. Professional shops use industrial oven for powder coating. However, you can get by with the use of infrared lamps and infrared camera. You will also need a powder coating gun.

Just like any other finishing process, powder coating starts with surface preparation. Remove the original paint from the wheel using appropriate method for the type of paint. There are paint removal solutions, heat gun, and wire brush to aid you. Do everything you need to not leave any of the original paint. Clean it and sand it as many times as needed until the surface is completely clean.

You can now proceed to ground the wheel. Most powder coating guns come with a grounding kit. The grounding kit delivers electric current to the wheel to magnetize it and make the powder paint stick to it. Proper grounding is needed if you want the best result.